Formed and bent capillary starts with geometry that stays true through the bend. OD, ID and wall thickness are produced strictly per drawing; straight-cut lengths with deburred ends are standard, and longer runs can be coiled where handling allows. Tolerances are confirmed before production and locked in the batch record, so the capillary you bend matches the drawing you approved.

• High ductility, annealed standard — elongation ≥35% in the soft condition supports tight-radius forming and bending.
• Seamless drawn integrity — no weld seam along the length; bore concentricity held through the full run.
• Nickel 200 purity — UNS N02200 at ≥99.2% Ni per catalog, with the melting point at 1435-1446 °C.
• Documented batch quality — per-batch composition analysis and dimensional inspection on our ISO 9001 certified line, with EN 10204 3.1 MTC per shipment.
• 7-15 day delivery — export packaging and documentation prepared with every order.

A weld seam is the first place a bend fails. Seamless drawn capillary bends as one continuous structure — no seam to open, crack or trap contamination under forming stress — which is why forming and bending programs specify seamless construction from the start.

The annealed (soft) condition keeps Nickel 200 capillary formable for tight-radius bends and coils used in instrument lines and process loops; work-hardened tempers are available per drawing where stiffness is required. Bend radii, springback allowance and minimum wall retention are confirmed against your drawing before production.

For thin-wall capillary, burst pressure follows the Barlow formula P = 2St/D, where S is allowable stress, t is wall thickness and D is outside diameter. With S = 100 MPa (assumed for annealed nickel, confirm per design code) and a 1.6 mm OD * 0.2 mm wall capillary, P = 2 * 100 * 0.2 / 1.6 = 25 MPa (calculated, indicative only).

Pure nickel resists caustic alkalis and hydrofluoric acid environments; corrosion behaviour depends on grade purity and service chemistry, so specific media compatibility is confirmed against the operating environment before final grade selection.

The bands above are indicative for standard tube sizes. Capillary precision sizes (custom OD/ID/wall, cut lengths) are quoted per drawing — grade, geometry, length and quantity determine the final price.

Annealed (soft) as standard, with elongation ≥35% for tight bends and coils; work-hardened tempers are available per drawing where stiffness is needed.

Yes. It is seamless drawn from solid tube stock, with no weld seam along the length.

10 kg for standard grades; sample and trial quantities can be discussed per request.

ISO 9001 certified facility, SGS audited; EN 10204 3.1 mill test certificates, batch composition and dimensional records with every shipment.

7-15 days from confirmed drawing and order.